Lexmark MS510 User Manual page 149

Understanding the printer menus
Use
Print Recovery
Auto Continue
Disabled
5–255 sec
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Press Sleep Button
Do nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
1
This menu item appears only in touch‑screen printer models.
2
This menu item appears only in non‑touch‑screen printer models.
To
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
Notes:
• On is the factory default setting. On sets the printer to
automatically dump or partially printed pages to the
standard bin after a jammed page has been cleared.
•
Off requires the user to remove all pages from all possible
jam locations.
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
•
Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
Set the printer to hibernate mode even there is an active Ethernet
connection.
Note: Do Not Hibernate is the factory default setting.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: "Do nothing" is the factory default setting.
149