Lexmark MS510 User Manual page 17

Additional printer setup
2
Lightly press the stop on the left side of the controller board access door, and then slide the access door to remove.
3
Unpack the ISP kit.
Note: Make sure to remove and discard the small cable attached to the white connector.
1 ISP solution
2 Screw to attach the ISP solution to the plastic bracket
3 ISP exterior cover
4 Screws to attach the ISP solution to the ISP exterior cover
5 Plastic bracket
6 Long ISP cable
1
6
5
4
2
3
1
2
3
17