Ipv6 Menu - Lexmark MS510 User Manual

Understanding the printer menus
Use
Enable DDNS
Yes
No
Enable mDNS
Yes
No
DNS Server Address
Backup DNS Server Address
Backup DNS Server Address 2
Backup DNS Server Address 3
Enable HTTPS
Yes
No

IPv6 menu

To access the menu, navigate to any of the following:
•
Network/Ports > Standard Network > Standard Network Setup > IPv6
•
Network/Ports > Network [x] > Network [x] Setup > IPv6
Note: This menu is available only in network printers or printers connected to print servers.
Use
Enable IPv6
On
Off
Auto Configuration
On
Off
*
Set Hostname
*
View Address
*
View Router Address
Enable DHCPv6
On
Off
*
These settings can be changed only from the Embedded Web Server.
To
View or change the current DDNS setting.
Note: Yes is the factory default setting.
View or change the current mDNS setting.
Note: Yes is the factory default setting.
View or change the current DNS server address.
View or change the backup DNS server addresses.
View or change the current HTTPS setting.
Note: Yes is the factory default setting.
To
Enable Internet Protocol Version Six (IPv6) in the printer.
IPv6 uses bigger numbers to create IP addresses.
Note: On is the factory default setting.
Specify whether or not the network adapter accepts the automatic IPv6
address configuration entries provided by a router.
Note: On is the factory default setting.
Set the host name.
Note: The host name is limited to 15 characters, and accepts US‑ASCII,
alphanumeric characters and hyphen only.
View the current IPv6 addresses.
View the current router address.
Enable DHCPv6 in the printer.
Note: On is the factory default setting.
131