Saving Energy - Lexmark MS510 User Manual

Using MS510dn and MS610dn
Checking the status of parts and supplies from the Embedded Web Server
Note: Make sure the computer and printer are connected to the same network.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Device Status > More Details.

Saving energy

Using Eco‑mode
Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact.
1
From the printer control panel, navigate to:
> Settings > Settings >
Use To
Off Use the factory default settings for all settings associated with Eco‑Mode. This setting supports the
performance specifications for your printer.
Energy Reduce energy use, especially when the printer is idle.
•
Printer engine motors do not start until a job is ready to print. You may notice a short delay before
the first page is printed.
•
The printer enters Sleep mode after one minute of inactivity.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper
• Enable the automatic two‑sided (duplex) feature.
•
Turn off print log features.
2
Press .
Reducing printer noise
Use Quiet mode to reduce the printer noise.
1
From the printer control panel, navigate to:
> Settings > Settings >
2
Select a setting you want.
> General Settings >
> General Settings >
> Eco‑Mode > > select the setting you want
> Quiet Mode >
60