Multitech MultiVOIP 100 (MVP110 Quick Start Manual page 17

17. The Billing/Security tab displays the parameters for
billing options, call authentication, and automatic
disconnection.
18. You can set up billing options for inbound and outbound
calls by selecting them in the Billing Options group and
then entering the charge in cents per number of seconds.
19. The Call Authentication option enables password
protection for outbound and inbound calls on the selected
voice/fax channel. If you enable password protection on
inbound or outbound calls, you need to also enter a
password of up to 14 numeric characters in the Password
box.
20. The Automatic Disconnect option limits call duration to
the number of seconds entered in the Disconnect After
box. The default value of 180 seconds can be changed to
any other value up to 65,535 (roughly 18.2 hours).
Configure Host MultiVOIP
17