Loading A Single Additional Voice To The Tyros4-Individual Load - Yamaha Tyros4 Reference Manual

Loading a single Additional Voice to the Tyros4—Individual Load
This operation allows you to load a single additional Voice (including from Custom Voices, Custom Drum Voices and
downloaded Premium Voices) to the Expansion Voice bank in the instrument for playing or editing.
1
Call up the operation display.
[VOICE CREATOR]  [D] INDIVIDUAL LOAD
2
Use the TAB [][] buttons to select the location or device
containing the desired Voice.
3
Select the desired Voice in the display.
If you select a Custom Voice/Custom Drum Voice, the Expansion Voice bank
appears.
4
4
If you select a Voice which has been downloaded from the website, loading will
automatically start and steps 4–7 are omitted.
4
By using the [A]–[J] buttons and [1 ]–[8 ] buttons, select the
destination for the Voice.
5
Press the [6 ] (STORE) button.
6
If desired, enter a name for the Voice.
If a Voice with the same name already exists in the bank, you'll need to enter a
new name for the Voice.
7
Press the [8 ] (OK) button to start loading.
To cancel, press the [8 ] (CANCEL) button.
After the loading is finished, you can select the Voice from the [EXPANSION]
button.
5
File loading may take as little as a cou-
ple of seconds or as long as a few min-
utes, depending on how much data is
contained in the Voice.
Tyros4 Reference Manual
NOTE
31
1