Yamaha Tyros4 Reference Manual page 45

4
Select the channel for which you wish to replace the pattern by
using the [A]–[D] and [F]–[I] buttons. Call up the Style Selection
display by pressing the same button again. Select the Style
containing the pattern you want to replace in the Style Selec-
tion display.
To return to the previous screen, press the [EXIT] button after selecting the Style.
4
5
5
Select the desired section of the newly imported Style (chosen
in step 4) by using the [2 ]/[3 ] (SECTION) buttons.
6
Select the desired channel for the section (chosen in step 5) by
using the [4 ]/[5 ] (CHANNEL) buttons.
Repeat steps 4–6 above to replace the patterns of other channels.
Playing the Style During Style Assembly
While you are assembling a Style, you can play back the Style and select the
method of playback. Use the [6 ]/[7 ] (PLAY TYPE) buttons in the
Style Assembly display to select the playback method.
• SOLO: Mutes all but the selected channel in the ASSEMBLY Page. Any
channels set to ON in the RECORD display on the BASIC Page are
played back simultaneously.
• ON: Plays back the selected channel in the ASSEMBLY Page. Any chan-
nels set to other than OFF in the RECORD display on the BASIC Page
are played back simultaneously.
• OFF: Mutes the selected channel in the ASSEMBLY Page.
7
Press the [J] (SAVE) button to execute the Save operation.
6
[A]–[D],
[F]–[I] buttons
Tyros4 Reference Manual
NOTICE
The edited Style will be lost if you
change to another Style or turn
the power to the instrument off
without executing the Save opera-
tion.
2
45