Editing the Detail Tab Parameters
Use the [B]–[E] buttons to select the BAND PASS FILTER 1–5 or
6–10, then set the value by using the [1 ]–[5 ] buttons or
sliders.
BAND PASS FILTER 1–10 parameters
Determines each output gain of the BPF 1 – 10 for the Inst Input (keyboard perfor-
mance sound). The BPF 1 corresponds to the lowest Formant while the BPF 10
corresponds to the highest Formant.
Settings: -18dB – +18dB
106
Tyros4 Reference Manual
NOTE
Feedback (howling) may result depend-
ing on the setup settings. Be careful
especially when you increase values.