Replacing Registrations; Next Regist (Registration) Settings (Changing The Order Of The Registration Data) - Yamaha DDK-7 Owner's Manual

NOTE
If the next Registration data
contains User voices, the
DDK-7 may produce no
sound for a few seconds
while the Registration is
being loaded.
NOTE
If the Next Regist
(Registration) function is
used while the rhythm is
being played back, the
sequence data and User
rhythm will not change.
24 DDK-7 Version 1.1 New Functions

Replacing Registrations

The M.D.R. also lets you change the Registrations of an existing song without
changing the performance data. In advance, you need to create the original Registration
that will replace the old one.
Select the song for which you wish to replace the Registrations.
1
For details on selecting a song, see page 12.
Press the [REGIST EDIT] button in the display to call up the
2
Regist (Registration) Edit display.
The Registration bank which has been saved to the song is shown.
3
Select the Registration data you wish to replace.
Press the [SAVE] button.
4
A message appears, prompting confirmation of overwriting the Registration
bank. Select [OVERWRITE] to overwrite (replace), or select [CANCEL] to
abort the operation.
Next Regist (Registration) Settings (Changing the order
of the Registration data)
When playing back a song which uses more than 16 Registration numbers, you can use
two or more Registration banks saved in a single song and recall them one by one as
you play the song. This function is called Next Regist (Registration).
M1
If you want to use the Next Regist (Registration) function, you'll have to make one of
the following settings in advance:
• Set the Registration Shift mode to User, and select Next Regist (Registration) as
the Shift End, in advance. Refer to the Owner's Manual, chapter 6 for the
details.
• Enter the Next Regist (Registration) data in the Registration Sequence. Refer
to the Owner's Manual, chapter 9 for the details.
Save the desired Registrations to a song.
1
For instructions on saving two or more Registration banks to a song, see page 23.
Select the song containing the Registrations for which you want
2
to change the order.
For details on selecting a song, see page 12.
M16 M1
REG_001 REG_002
M16