Talk Page - Yamaha Tyros4 Reference Manual

Digital workstation
Hide thumbs Also See for Tyros4:
Table of Contents

Advertisement

 COMPRESSOR (selected by [C] or [D] button)
This effect holds down the output when the input signal from the microphone exceeds a
specified level. This is especially useful for smoothing out vocals that have widely varying
dynamics. It effectively "compresses" the signal, making soft parts louder and loud parts
softer. For a maximum compression effect, set RATIO to a high setting and adjust the
OUT parameter for optimum volume.
[3 ]/
SW (Switch)
[4 ]/
TH. (Threshold)
[5 ]
RATIO
[6 ]
OUT
 PITCH DETECT (selected by [E] button)
[1 ]/
VOCAL TYPE
[2 ]
[3 ]/
BACKGROUND
[4 ]
NOISE CUT
[5 ]/
SPEED
[6 ]

TALK Page

The settings on the TALK page are microphone settings that are active when the Talk function is on. All indications and
parameters (with the exception of TALK MIXING below) are the same as in the VOCAL page. However, the settings are
independent from those in the VOCAL page.
NEXT PAGE
120
Tyros4 Reference Manual
Turns the Compressor on or off.
Adjusts the input level at which compression begins to be applied.
Adjusts the compression ratio. Higher ratios result in a more compressed sound, with a
reduced dynamic range.
Adjusts the final output level.
Set this to obtain the most natural vocal harmony, depending on your voice.
LOW: Setting for lower voices. This setting is also appropriate for growling and shouting.
MID: Setting for mid-range voices.
HIGH: Setting for higher voices. This setting is also appropriate for singing close to the
microphone.
FULL: Setting for vocalists having a wide range, from low to high.
THRU, 200Hz, 300Hz, 400Hz, 500Hz
This allows you to filter out low noises that would interfere with the Vocal Harmony effect. A
setting of "THRU" turns the noise filter off.
1 (SLOW) – 4 (NORMAL) – 15 (FAST)
Adjusts the response of the Vocal Harmony effect, or how quickly harmonies are generated in
response to your voice.
NOTE
When one or both parts of Lead and Harm. Pitch Detect Speed of the Vocal Harmony are set to "as Mic Setting," this
parameter is effective. In other settings, the setting of the Vocal Harmony's Pitch Detect Speed is effective.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents