Line Out Settings - Yamaha Tyros4 Reference Manual

Line Out Settings

PANEL Page
[F]
[1 ]–
[3 ]
[1 ]/
[2 ]
[3 ]
[4 ]
[5 ]
[6 ]
[7 ]
114
Tyros4 Reference Manual
DRUM&PERC./ Switches the displayed menu: PANEL parts or DRUM & PERCUSSION instruments.
PANEL
PART Selects the desired part/drum instrument.
(PANEL Page)
INSTRUMENTS
(DRUM & PER-
CUSSION Page)
DEPEND ON Checking here, the selected drum instrument will be output via the jacks set from the
PART PANEL page at left.
(DRUM & PER-
CUSSION Page)
MAIN Checking here, the selected part/drum instruments will be output from LINE OUT
MAIN jacks, PHONES jacks, LOOP SEND jack, and optional speaker.
SUB1 Checking one of these columns (jacks), the selected part/drum instruments will be
output from only the selected SUB jack(s). When you select "SUB1 & 2", the sound
will be output in stereo (SUB1: left, SUB2: right).
NOTE
SUB2
When using one of the SUB Line Out settings, make sure that you've connected cables to the appropriate
LINE OUT SUB jacks on the rear panel. If cables are only connected to the MAIN jacks, the sound of the
Part will be output through the MAIN jacks, even if one of the SUB1/SUB2/SUB1&2 is checkmarked.
NOTE
SUB1 & 2
Only the DSP2–9 and Vocal Harmony effects can be applied to the sound output from the SUB jacks. Other
effects (Reverb, Chorus and DSP1) will not be applied. (If the "Connection" parameter of the DSP1 is set to
"Insertion", the DSP1 will also be applied.)
DRUM & PERCUSSION Page
Press [F]
button