Yamaha Tyros4 Reference Manual page 25

3
Press the [G] (CUSTOM VOICE ASSEMBLY) button to call up the
Drum Mapping display.
4
4
Specify the key to be edited.
Press the desired key on the keyboard or use the [1 ]/[2 ] (TARGET) but-
tons.
5
Select the desired instrument (drum/percussion) of Preset
Drum Voice or Wave to be assigned by following the procedure
below.
5-1
Press the [F] (SELECT WAVE) button.
5-2
Use the TAB [][] buttons to select the desired tab page: PRESET or
EXP.
• PRESET: contains the instrument of Preset Drum Voice
• EXP.: contains the Wave files in the expansion module
5-3
If you selected Preset tab on step 5-2, use the [F] and [G] buttons to select
the category which contains the desired instrument.
Select the desired audio (instrument/Wave) files by using the [1 ]–
5-4
[5 ] buttons, then press the [ENTER] button to confirm your selection.
PRESET
[F] CATEGORY
KIT  INST.
[G]
[J] EMPTY
[1 ]/
PAGE Up/Down
[2 ]
[3 ]–
Up/Down
[5 ]
[6 ]
AUDITION
NEXT PAGE
Calls up a popup window, allowing you to select the desired instrument (drum/per-
cussion) category, if INST. is selected in KIT  INST. below, or the Drum Kit
Voice, if KIT is selected. While the popup window appears, use the [G]/[H] buttons
to make the selection.
KIT: Sorts the sounds according to the containing Drum Kit Voice.
INST.: Sorts the sounds according to the instrument (drum/percussion) type.
Disables the selection.
See page 19.
5
Tyros4 Reference Manual
1
25