Disabling Recall Of Specific Items (Freeze Function); Calling Up Registration Memory Numbers In Order - Registration Sequence; U [Freeze] Button; Registration Memory Bank - Yamaha Portatone PSR-1500 Owner's Manual

Recalling the Registered Panel Setups
CAUTION
Settings in the REGISTRATION
FREEZE display are automati-
cally saved to the instrument
when you exit from this dis-
play. However, if you turn the
power off without exiting
from this display, the settings
will be lost.
132 PSR-3000/1500 Owner's Manual
Disabling Recall of Specific Items (Freeze Func-
tion)
Registration Memory lets you recall all the panel setups you made with a single
button press. However, there may be times that you want certain items to remain
the same, even when switching Registration Memory setups. For example, you may
want to switch Voices or effect settings while keeping the same accompaniment
Style. This is where the Freeze function comes in handy. It lets you maintain the set-
tings of certain items and leave them unchanged, even when selecting other Regis-
tration Memory buttons.
1
Call up the operation display.
[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET →
TAB [ √ ]/[ ® ] FREEZE
2
Press the [2 π † ]–[7 π
π π π † † †
3
Enter checkmarks for the items to be "Frozen" (i.e., to remain
unchanged), by pressing the [8 π
4
Press the [EXIT] button to exit from the operation display.
5
Press the [FREEZE] button on the panel to turn the Freeze function on.
Calling Up Registration Memory Numbers in
Order — Registration Sequence
As convenient as the Registration Memory buttons are, there may be times during a
performance when you want to quickly switch between settings — without having
to take your hands from the keyboard. The convenient Registration Sequence func-
tion lets you call up the eight setups in any order you specify, by simply using the
TAB [ √ ]/[ ® ] buttons or the pedal as you play.
1
Select the desired Registration Memory bank to program a sequence
(page 130).
2
Call up the operation display.
[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET →
TAB [ √ ]/[ ® ] REGISTRATION SEQUENCE
3
If you intend to use a pedal to switch Registration Memory settings,
specify here how the pedal will be used—to advance or to reverse
through the sequence.
Use the [C] button to select the pedal for advancing through the sequence.
Use the [D] button to select the pedal for reversing through the sequence.
† ] buttons to select items.
π † π π † †
† ] button.
π † π †
π †