System Reset; Factory Reset-Restoring The Factory Programmed Settings - Yamaha Tyros4 Reference Manual

SYSTEM RESET

There are two reset methods in the SYSTEM RESET display: Factory Reset and Custom Reset.
Factory Reset
(see below)
Factory Reset—Restoring the Factory Programmed Settings
This function lets you restore the status of the Tyros4 to the original factory settings.
1
Select the desired item to be restored by using [1 ]–[3 ]
buttons and add a checkmark to it by pressing the [4 ] (MARK
ON) button.
To remove the checkmark, press the [4 ] (MARK OFF) button.
SYSTEM SETUP
MIDI SETUP
USER EFFECT
MUSIC FINDER
FILES & FOLDERS
REGIST
EXPANSION VOICE
2
Press the [D] (FACTORY RESET EXECUTE) button to execute
the Factory Reset operation for all checkmarked items.
Restores the System Setup parameters to the original factory settings. Refer to the Data List
for details about which parameters belong to the System Setup.
Restores the MIDI settings including the MIDI templates on the USER tab display to the
original factory status.
Restores the User Effect settings including the user effect types, user master EQ types and
user compressor types created via the Mixing Console display, as well as the user vocal har-
mony types and user microphone setting memories to the original factory settings.
Restores the Music Finder data (all records) to the original factory settings.
Deletes all files and folders stored in the USER tab display.
Temporarily deletes the current Registration Memory settings of the selected Bank. The
same can be done also by turning the power on while holding the B5 key (right-most B key
on the keyboard).
Deletes all Expansion Voices.
Custom Reset
(see page 138)
Tyros4 Reference Manual
12
137