Yamaha Tyros4 Reference Manual page 86

[1 ]–
[4 ]
[5 ]
[6 ]
[7 ]
[8 ]
6
Press the [F] button to turn the Registration Sequence function
on.
7
Press the [EXIT] button to exit from the operation display.
Confirming the Registration Sequence Setting in the Main Display
In the Main display, you can confirm whether the Registration Memory numbers are called up according to the sequence
programmed above.
To shift the Registration Memory numbers, use the TAB [][] buttons when the Main
display is shown. When pedal operation has been set in step 3 on
a pedal to select the Registration Memory numbers in order. The pedal can be used for
Registration Sequence no matter which display is called up (except for the display in step
3 on page 85).
To return to the first Sequence, press the TAB [] and [] buttons simultaneously when
the Main display is shown. This cancels the currently selected Sequence number (the box
indicator at the top right goes out). The first Sequence will be selected by pressing one of
the TAB [][] buttons or by pressing the pedal.
Saving the Registration Sequence Settings
The settings for the Sequence order and how Registration Sequence behaves when reach-
ing the end of the sequence (SEQUENCE END) are included as part of the Registration
Memory Bank file. To store your newly programmed Registration Sequence, save the cur-
rent Registration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection display.
2
Press the [6 ] button to save the Bank file.
86
Tyros4 Reference Manual
CURSOR Moves the cursor.
REPLACE Replaces the number at the cursor position with the currently selected Registration
Memory number.
INSERT Inserts the number of the currently selected Registration Memory number before the
cursor position.
DELETE Deletes the number at the cursor position.
CLEAR Deletes all numbers in the sequence.
The Registration Sequence is indicated at the
top right of the Main display, letting you confirm
the currently selected number.
page 85, you can also use
NOTICE
Settings in the REGISTRATION
SEQUENCE display are automati-
cally saved to the instrument
when you exit from this display.
However, if you turn the power off
without exiting from this display,
the settings will be lost.
NOTE
The pedal can be used for Registration
Sequence no matter which display is
called up (except for the display in step
3 on page 84).
NOTICE
Keep in mind that all Registration
Sequence data is lost when
changing Registration Memory
Banks, unless you've saved it
with the Registration Memory
Bank file.