Yamaha Tyros4 Reference Manual page 62

3
Press the [F] button to select the channel for recording.
4
Press the [G] (STEP REC) button to call up the STEP RECORD
display.
5
Start Step Recording by using the [A]–[J] buttons and [1 ]–
[8 ] buttons.
Refer to the example on
[A]/[B]/[C]
[G]
[H]
[I]
[J]
[1 ]
[2 ]
[3 ]
[4 ]–
[8 ]
62
Tyros4 Reference Manual
page 63 for specific instructions.
Moves the cursor in the list.
Determines the velocity (loudness) of the note to be entered. The velocity value can be
specified within a range from 1 to 127. The higher the velocity value, the louder the
sound becomes.
KBD.VEL: Actual resulting velocity
fff: 127
ff: 111
f: 95
mf: 79
mp: 63
p: 47
pp: 31
ppp: 15
Determines the gate time (note length) of the note to be entered.
Normal: 80%
Tenuto: 99%
Staccato: 40%
Staccatissimo: 20%
Manual: The gate time can be set to any desired percentage by using the [DATA
ENTRY] dial.
Determines the note type to be entered: normal, dotted or triplet.
DELETE Deletes the selected data.
BAR Sets the position of the note to be entered.
BEAT
CLOCK
Determines the note length to be entered: whole-note, half-note, quarter-note, eighth-
note or sixteenth-note.
When a note is input, the location
(bar: beat: clock), note name, velocity
and length are shown as a list.