Multi Pad Editing - Yamaha Tyros4 Reference Manual

Multi Pad Editing

From the MULTI PAD EDIT display, you can rename, copy or delete a Multi Pad.
1
Press the MULTI PAD CONTROL [SELECT] button to call up the
Multi Pad Bank Selection display, then select a Bank to be
edited.
2
Press the [8 ] (EDIT) button to call up the MULTI PAD EDIT
display.
3
Select a particular Multi Pad to be edited by pressing any of the
[A], [B], [F] and [G] buttons.
4
Edit the selected Pad as desired.
[1] NAME
[3] COPY
[5 ]
DELETE
For details on the naming and deleting procedures, refer to the Owner's Manual.
Copying the Multi Pad
1 Press the [3 ] button in step 4 above.
2
Select the Multi Pads to be copied by using the [A], [B], [F] and [G] but-
tons, then press the [7 ] (OK) button.
The selected Multi Pad(s) is copied to the clipboard.
3
Select the destination location by using the [A], [B], [F] and [G] buttons.
If you want to copy the selected Pad(s) to another bank, press the [8 ]
(UP) button to call up the Multi Pad Bank Selection display, select the
desired bank, press the [8 ] (EDIT) button, then select the destination.
4 Press the [4 ] (PASTE) button to execute the Copy operation.
Changes the name of each Multi Pad.
Copies the Multi Pad(s). See below.
Deletes the selected Multi Pads.
Tyros4 Reference Manual
4
79