Disabling Automatic Selection Of Voice Sets (Effects, Etc.) - Yamaha Tyros4 Reference Manual

Disabling Automatic Selection of Voice Sets (Effects, etc.)

Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically called up
when a Voice is selected. However, you can also disable this feature by the operation in the relevant display as explained
below.
For example, if you want to change the Voice yet keep the same Harmony effect, set the HARMONY/ECHO parameter
to OFF (in the display explained below).
1
Call up the operation display.
[FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB
[][] VOICE SET
2
Use the [A]/[B] buttons to select a keyboard part.
2
3
Use the [4 ]–[7 ] buttons to enable/disable automatic
calling up of the settings (ON or OFF) independently for each
parameter group.
3
Tyros4 Reference Manual
1
15