Midi Receive Settings - Yamaha Tyros3 Reference Manual

MIDI Receive Settings

The explanations here apply to the RECEIVE Page in step 4 on
MIDI data and over which MIDI channels the data will be received.
1
Use the [A]/[B] buttons or [1 ▲▼]/[2 ▲▼] buttons to select the chan-
nel to be received
The Tyros3 can receive MIDI messages over 32 channels (16 channels x 2
ports).
2
Use the [3 ▲▼] buttons to select the part via which the selected chan-
nel will be received.
With the exception of the two parts below, the configuration of the parts is the
same as those already explained elsewhere in the Owner's Manual.
● KEYBOARD
The received note messages control the Tyros3's keyboard performance.
● EXTRA PART 1–4
There are four parts specially reserved for receiving and playing MIDI data.
Normally, these parts are not used by the instrument itself. The Tyros3 can be
used as a 32-channel multi-timbral tone generator by using these four parts in
addition to the parts (except for the microphone sound).
3
Use the [4 ▲▼]–[8 ▲▼] button to determine the types of data to be
received.
MIDI transmission/reception via the USB terminal and MIDI terminals
The relationship between the [MIDI] terminals and the [USB] terminal which can be used for transmitting/
10 receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
10
116 • Tyros3 Reference Manual
1
1 2
● MIDI reception
MIDI A IN USB
terminal connector
Port handling
USB1 USB2
Merge
MIDI A 01–16 MIDI B 01–16
page 112. This determines which parts will receive
The dots corresponding to each
channel (1–16) flash briefly when-
ever any data is received on the
channel(s).
3
● MIDI transmission
MIDI B IN MIDI A OUT
terminal terminal
Merge
USB MIDI B OUT
connector terminal
MIDI A 01–16 MIDI B 01–16