Disabling Recall Of Specific Items (Freeze); Registration Memory - Yamaha Tyros3 Reference Manual

Registration Memory

– Saving and Recalling Custom Panel Setups –
Contents
Disabling Recall of Specific Items (Freeze) . . . . . . . . . . . . . . . 77
Calling Up Registration Memory Numbers in Order (Registra-
tion Sequence) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
• Confirming the Registration Sequence Setting in the Main Display . . 79
• Saving the Registration Sequence Settings . . . . . . . . . . . . . . . . . .79
Disabling Recall of Specific Items (Freeze)
Registration Memory lets you recall all the panel setups you made with a single button press. However, there may
be times that you want certain items to remain the same, even when switching Registration Memory setups. For
example, you may want to switch Voices or effect settings while keeping the same accompaniment Style. This is
where the Freeze function comes in handy. It lets you maintain the settings of certain items and leave them
unchanged, even when selecting other Registration Memory buttons.
1
Call up the operation display.
[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET → TAB [
FREEZE
2
Determine the items to be "frozen."
Select the desired item by using the [2 ▲▼]–[7 ▲▼] buttons, then enter or
remove the checkmark by using the [8 ▲] (MARK ON)/[8 ▼] (MARK OFF) but-
tons.
3
Press the [EXIT] button to exit from the operation display.
4
Press the [FREEZE] button on the panel to turn the Freeze function
on.
2 2
-1 -2
Q Q Q Q W W W W
][ ]
CAUTION
Settings in the REGISTRATION
FREEZE display are automatically
saved to the instrument when you
exit from this display. However, if
you turn the power off without
exiting from this display, the set-
tings will be lost.
Tyros3 Reference Manual • 77
6
6