Footswitch/Foot Controller Settings; Assigning Specific Functions To Each Foot Pedal - Yamaha Tyros3 Reference Manual

Footswitch/Foot Controller Settings

Assigning Specific Functions to Each Foot Pedal
The functions assigned by default to the connected footswitch or foot controller can be changed—for example, let-
ting you use the footswitch to start/stop Style playback, or use the foot controller to produce pitch bends.
1
Call up the operation display.
[FUNCTION] → [D] CONTROLLER
2
Use the [A]/[B] buttons to select one of three foot pedals to which the
function is to be assigned.
2
3
4
3
Use the [C]/[D] buttons to select the function to be assigned to the
pedal specified in step 2.
For information on available parameters, see pages 110–111.
4
Use the [1 ▲▼]–[8 ▲▼] buttons to set the details of the selected func-
tions (the part for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5
If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you've
connected to the Tyros3. For example, pressing down on one pedal may turn
the selected function on, while pressing a different make/brand of pedal may
turn the function off. If necessary, use this setting to reverse the operation.
→
TAB [ Q Q Q Q ][ W W W W ] FOOT PEDAL
5
NOTE
You can also assign the other functions
to the pedal—punch in/out of Song/
Hard Disk Recorder
Registration Sequence
assign multiple functions to the pedal,
the priority is: Punch in/out of Song or
Hard Disk Recorder → Registration
Sequence → Functions assigned here.
Tyros3 Reference Manual • 109
(pages 61, 84) and
(page 78). If you
10
10