Midi Receive Settings - Yamaha cvp-701 clavinova Reference Manual

MIDI Receive Settings

The explanations here apply to the RECEIVE Page in step 4 on
receive MIDI data and over which MIDI channels the data will be received.
1
Use the [A]/[B] buttons or [1]/[2] buttons to select the channel to be received.
The instrument can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB connection.
2
Use the [3] buttons to select the part via which the selected channel will be
received.
With the exception of the two parts below, the configuration of the parts is the same as those already
explained elsewhere in the Owner's Manual.
KEYBOARD
The received note messages control the instrument's keyboard performance.
EXTRA PART 1–5
There are five parts specially reserved for receiving and playing MIDI data. Normally, these parts are not
used by the instrument itself. The instrument can be used as a 32-channel multi-timbral tone generator by
11
using these five parts in addition to the parts.
3
Use the [4] – [8] button to determine the types of data to be received.
MIDI transmission/reception via the USB terminal and MIDI terminals
The relationship between the [MIDI] terminals and the [USB] terminal which can be used for
transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
98
CVP-701 Reference Manual
1
1 2
 MIDI reception
[MIDI IN] jack [USB TO HOST] jack
Wireless
LAN
Port handling
USB1
Merge
MIDI/USB1/
WLAN 01–16
page
3
 MIDI transmission
USB2
USB2
01–16
94. This determines which parts will
The dots corresponding to each channel (1–16)
flash briefly whenever any data is received on the
channel(s).
If "WLAN" is shown, this instrument can handle
MIDI messages received via the USB wireless
LAN adaptor connected to the [USB TO DEVICE]
terminal. When "WLAN" is not shown although
the USB wireless LAN adaptor is connected, turn
the instrument off then on again.
[MIDI OUT] jack [USB TO HOST] jack
Wireless LAN
MIDI/USB/WLAN 01–16