Midi Receive Settings - Yamaha PSR-SX600 Reference Manual

MIDI Receive Settings

The explanations here apply to the Receive page in step 4 on
receive MIDI data and over which MIDI channels the data will be received.
1
Use the [1 ]/[2 ] (Channel) buttons to select the channel to be received.
The [1 ] button can search the ports while the [2 ] button can search each of channels one by one.
You can use the [1 ] button to skip up or down through the next port, while you can use the [2 ]
button to move up or down to the next channel one by one.
The instrument can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB connection.
2
Use the [3 ] (Part) buttons to select the part via which the selected channel will be
received.
The Parts listed on this display are the same as those shown in the Mixer display and Channel On/Off
display with the exception of the following parts.
Keyboard: The received note messages control the parts which can be performed with the keyboard of
the instrument.
Extra Part 1–5: There are five parts specially reserved for receiving and playing MIDI data. Normally,
these parts are not used by the instrument itself. The instrument can be used as a 32-channel multi-
timbral tone generator by using these five parts in addition to the other parts of the instrument.
3
Use the [4 ]–[8 ] button to enter checkmarks to the corresponding MIDI
messages you wish to be received.
MIDI messages (page
MIDI transmission/reception via the [USB TO HOST] terminals
The relationship of the USB terminals and their handling of MIDI messages (transmitting/receiving 32 channels; 16
channels x 2 ports) is shown in the following diagram:
 MIDI reception
[USB TO HOST] terminal
Wireless
LAN
Merge
USB1/WLAN
01–16
1 2 3
102) having checkmarks can be received.
Port handling
USB1 USB2
USB2
01–16
page 99. This determines which parts will
The dots corresponding to each channel (1–16)
flash briefly whenever any data is received on the
channel(s).
If "WLAN" is shown, this instrument can handle
MIDI messages received via the USB wireless LAN
adaptor connected to the [USB TO DEVICE] termi-
nal. When "WLAN" is not shown although the USB
wireless LAN adaptor is connected, turn the instru-
ment off then on again.
 MIDI transmission
[USB TO HOST] terminal
Wireless LAN
USB/WLAN 01–16
PSR-SX600 Reference Manual
9
103