Yamaha Tyros3 Reference Manual page 38

Reference manual (version 1.0 - version 1.11)
Hide thumbs Also See for Tyros3:
Table of Contents

Advertisement

6
Specify the channel to be recorded by simultaneously holding down
the [F] (REC CH) button and pressing the appropriate numbered but-
ton, [1 ▼]–[8 ▼].
To cancel the selection, press the corresponding [1 ▼]–[8 ▼] button again.
2
2
7
Call up the Voice Selection display by using the [1 ▲]–[8 ▲] buttons
and select the desired Voice for the corresponding recording chan-
nels.
Press the [EXIT] button to close the Voice Selection display.
Recordable Voices
• RHY1 channel: Any except your original Organ Flute, SA and SA2 Voices
are recordable.
• RHY2 channel: Only drum/SFX kits are recordable.
• BASS–PHR2 channels: Any except your original Organ Flute, drum/SFX
kits, SA and SA2 Voices are recordable.
8
If necessary, delete a channel by simultaneously holding down the [J]
(DELETE) button and pressing the appropriate numbered button, [1
▲]–[8 ▲].
You can cancel the deletion by pressing the same numbered button again
before releasing your finger from the [J] button.
9
Start recording by pressing the STYLE CONTROL [START/STOP] but-
ton.
Playback of the specified section starts. Since the accompaniment pattern
plays back repeatedly in a loop, you can record individual sounds one by one,
listening to the previous sounds as they play. For information on recording to
channels other than the rhythm channels (RHY1, 2), refer to the section "Rules
when recording non-rhythm channels"
Deleting recorded notes in the rhythm channel
When you are recording the rhythm channel (RHY1 or RHY2), you can
delete a specific instrument sound by simultaneously holding down the [E]
(RHY CLEAR) button and pressing the appropriate key on the keyboard.
Muting specific channels
You can turn off the desired channels by pressing the corresponding [1 ▼]–
[8 ▼] buttons.
NEXT PAGE
38 • Tyros3 Reference Manual
7
(page
6
39).
NOTE
Preset Organ Flute Voice can be
recorded to the RHY1 and BASS–PHR2
channels.
NOTE
When recording channels BASS–PHR2
based on the existing Style, you have to
delete the original data before record-
ing.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents