Midi Receive Settings - Yamaha PSR-S750 Reference Manual

MIDI Receive Settings

The explanations here apply to the RECEIVE page in step 4 on
receive MIDI data and over which MIDI channels the data will be received.
1
Use the [A]/[B] buttons or [1
The PSR-S950/S750 can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB
connection.
2
Use the [3
received.
The Parts listed on this display are the same as those shown in the MXING CONSOLE display and
CHANNEL ON/OFF display with the exception of the following parts.
KEYBOARD
The received note messages control the instrument's keyboard performance.
EXTRA PART 1–5
There are five parts specially reserved for receiving and playing MIDI data. Normally, these parts are not
used by the instrument itself. The PSR-S950/S750 can be used as a 32-channel multi-timbral tone
generator by using these five parts in addition to the parts (except for the microphone sound).
3
Use the [4
MIDI transmission/reception via the [USB TO HOST] terminal and MIDI [IN]/[OUT] terminals
The relationship between the MIDI [IN]/[OUT] terminals and the [USB TO HOST] terminal which can
be used for transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as
10
follows:
108
PSR-S950/S750 Reference Manual
1
] buttons to select the part via which the selected channel will be
]–[8 ] button to determine the types of data to be received.
MIDI reception
[MIDI IN] terminal [USB TO HOST] terminal
Port handling
USB1 USB2
Merge
MIDI/USB1 USB2
01–16 01–16
page 104. This determines which parts will
1 2 3
]/[2 ] buttons to select the channel to be received.
MIDI transmission
[MIDI OUT] terminal
The dots corresponding to each channel
(1–16) flash briefly whenever any data is
received on the channel(s).
[USB TO HOST] terminal
MIDI/USB 01–16