Changing The Part Assignment Of The Transpose Buttons - Yamaha Tyros3 Reference Manual

3
Change the following settings as necessary.
[2 ▲▼]
1
1
[3 ▲▼]–
[5 ▲▼]
[6 ▲▼]/
[7 ▲▼]
[8 ▲▼]

Changing the Part Assignment of the TRANSPOSE Buttons

You can determine to which parts the TRANSPOSE [-]/[+] buttons are applied.
1
Call up the operation display.
[FUNCTION] → [D] CONTROLLER → TAB [
2
Use the [A]/[B] buttons to select "4. TRANSPOSE ASSIGN."
3
Press the [4 ▲▼]/[5 ▲▼] buttons to select the desired transpose type.
KEYBOARD
SONG
MASTER
You can confirm the setting here by viewing the pop-up window called up via
the TRANSPOSE [-]/[+] buttons.
10 • Tyros3 Reference Manual
BASE NOTE Determines the base note for each scale. When the base note is changed, the
pitch of the keyboard is transposed, yet maintains the original pitch relation-
ship between the notes.
Select the desired note to be tuned by using the [3 ▲▼] button and tune it in
TUNE
cents by using the [4 ▲▼]/[5 ▲▼] buttons.
PART SELECT Select the part to which the Scale Tune setting is applied by using the [6
▲▼]/[7 ▲▼] buttons. Then press the [8 ▲] button to add a checkmark or
press the [8 ▼] button to remove the checkmark.
MARK ON/OFF
When this is selected, the TRANSPOSE [-]/[+] buttons affect the
pitch of keyboard played Voices, Style playback (controlled by the
performance in the chord section of the keyboard), and Multi Pad
playback (when Chord Match is on, and left-hand chords are indi-
cated)—but they do not affect Song playback.
When this is selected, the TRANSPOSE [-]/[+] buttons affect only the
pitch of Song playback.
When this is selected, the TRANSPOSE [-]/[+] buttons affect the
overall pitch of the instrument.
Q Q Q Q ][ W W W W ] KEYBOARD/PANEL
NOTE
To register the Scale Tune settings to the
Registration Memory, be sure to
checkmark the SCALE item in the REG-
ISTRATION MEMORY CONTENTS dis-
play.