Receive-Midi Receive Channel Settings - Yamaha PSR-SX900 Reference Manual

Receive—MIDI Receive Channel Settings
The explanations here apply when you call up the "Receive" display in step 2 on
Part is used for each MIDI channel when the MIDI data is recognized by this instrument.
1
For each Channel, select the Part which is to handle the MIDI data of the corresponding
channel received from the external MIDI device.
When connecting via USB, MIDI data of 32 channels (16 channels x 2 Ports) can be handled by this instrument.
With the exception of the two parts below, the configuration of the parts is the same as those already explained
elsewhere in the Owner's Manual.
• Keyboard: The received note messages control the instrument's keyboard performance.
• Extra Part 1–5: These five parts are specially reserved for receiving and playing MIDI data. Normally, these
parts are not used by the instrument itself.
2
Touch [>] to call up the other page, and then select which MIDI messages are to be
received for each Channel.
MIDI transmission/reception via the USB terminal, Wireless LAN, and MIDI terminals
The relationship between the MIDI terminals, Wireless LAN and the [USB TO HOST] terminal which can be used
for transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
 MIDI reception
MIDI [IN] terminal
MIDI/USB1/WLAN
NOTE
The USB wireless LAN adaptor (sold separately) may not be available depending on your area.
124
PSR-SX900/SX700 Reference Manual
1
The dots corresponding to each channel (1–16) flash briefly whenever
any data is received on the channel(s).
[USB TO HOST] terminal
Wireless
LAN
Port handling
USB1 USB2
Merge
USB2
01–16 01–16
Alternates between the two pages.
 MIDI transmission
MIDI [OUT] terminal
Wireless LAN
MIDI/USB/WLAN 01–16
page 121. This determines which
2
[USB TO HOST] terminal