Split Point Settings - Yamaha Tyros3 Reference Manual

Split Point Settings

These are the settings (there are three Split Points) that separate the different sections of the keyboard: the Chord
section, the LEFT part section, the RIGHT 1–2 section and RIGHT 3 section. The three Split Point settings (below) are
specified as note names.
1
Call up the operation display.
[FUNCTION] → [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING → TAB
2
2
Q Q Q Q W W W W
[ ][ ] SPLIT POINT
2
Set the Split Point.
[F]
[G]
[H]
[I]
[1 ▲▼]/
[2 ▲▼]
[3 ▲▼]/
[4 ▲▼]
[5 ▲▼]/
[6 ▲▼]
34 • Tyros3 Reference Manual
Split Point (S)
Chord section
Split Point (S+L) Sets the Split Point (S) and Split Point (L) to the same note. Press the [F] but-
ton and rotate the [DATA ENTRY] dial. You can also specify the Split Point
directly from the keyboard by pressing the desired key on the keyboard while
holding the [F] button.
Split Point (S) Sets the each Split Point. Press one of the desired buttons and rotate the
[DATA ENTRY] dial. You can also specify the Split Point directly from the key-
board by pressing the desired key on the keyboard while holding one of the
Split Point (L)
[G]–[I] buttons.
Split Point (L) cannot be set lower than Split Point (S), and Split Point (R) cannot be set
Split Point (R)
lower than Split Point (L).
STYLE You can specify each Split Point by note name. "STYLE" indicates Split Point
(S), "LEFT" indicates Split Point (L) and "RIGHT3" indicates Split Point (R).
LEFT
RIGHT3
Split Point (L) Split Point (R)
Voice RIGHT
Voice LEFT
1–2
Split Point (S+L)
Chord section
+ Voice LEFT
NOTE
Voice
RIGHT 3
Voice RIGHT 1–3