Editing Filter Parameters; Editing Tune Parameters - Yamaha Tyros3 Reference Manual

Editing FILTER Parameters

[D]/[I]
[E]/[J]

Editing TUNE Parameters

8
8
[A]/[B]/
[F]/[G]
[C]/[H]
[D]/[I]
[E]/[J]
92 • Tyros3 Reference Manual
HARMONIC Allows you to adjust the resonance effect
CONTENT
BRIGHTNESS Determines the brightness of the sound for each part by adjusting the cutoff
frequency
PORTAMENTO Portamento is a function that creates a smooth transition in pitch from the
TIME first note played on the keyboard to the next. The Portamento Time deter-
mines the pitch transition time. Higher values result in a longer pitch change
time. Setting this to "0" results in no effect. This parameter is available when
the selected keyboard part is set to Mono.
PITCH BEND Determines the range of the PITCH BEND wheel for each keyboard part. The
RANGE range is from "0" to "12" with each step corresponding to one semitone.
If the Pitch Bend range is set to more than 1,200 cents (1 octave) via MIDI, the pitch of some
Voices may not be raised or lowered completely.
OCTAVE Determines the range of the pitch change in octaves, over two octaves up or
down for each keyboard part. The value set here is added to the setting via
the OCTAVE [-]/[+] buttons.
TRANSPOSE Allows you to set transposition for overall sound of the instrument (MASTER),
Song playback (SONG), or the keyboard pitch (KEYBOARD), respectively.
Please note that the "KEYBOARD" also transposes the keyboard pitch of Style
playback and the Multi Pads (since these are also affected by keyboard play in
the left-hand section).
TUNING Determines the pitch of each keyboard part.
(page 13).
NOTE
(page 13) for each part.