Yamaha Tyros3 Reference Manual page 62

[4 ▲▼]–
[6 ▲▼]
[7 ▲▼]/
[8 ▲▼]
3
3
3
While holding the SONG [REC] button, select the desired track by
using the [1 ▲▼]–[8 ▲▼] buttons and [C]/[D] buttons.
4
Press the SONG [PLAY/PAUSE] button to start Punch In/Out record-
ing.
Play the keyboard at the Punch In point and stop recording at the Punch Out
point.
5
Press the [I] (SAVE) button to execute the Save operation.
● Examples of re-recording with various Punch In/Out settings
The Tyros3 features several different ways you use the Punch In/Out function.
The illustrations below indicate a variety of situations in which selected mea-
sures in an eight-measure phrase are re-recorded.
REC START setting
REC END setting
NORMAL
REPLACE ALL
NORMAL
PUNCH OUT
NORMAL
PUNCH OUT AT=006
FIRST KEY ON
REPLACE ALL
FIRST KEY ON
PUNCH OUT
FIRST KEY ON
PUNCH OUT AT=006
PUNCH IN AT=003
REPLACE ALL
PUNCH IN AT=003
PUNCH OUT
PUNCH IN AT=003
PUNCH OUT AT=006
62 • Tyros3 Reference Manual
REC END (Punch Determines the Punch Out timing.
Out)
REPLACE ALL: This deletes all data after the point at which recording is
stopped.
PUNCH OUT: The Song position at which recording is stopped is regarded as
the Punch Out point. This setting maintains all data after the point at
which recording is stopped.
PUNCH OUT AT: Actual overwrite recording continues until the beginning of
the specified Punch Out measure (set with the corresponding display but-
ton), at which point recording stops and normal playback continues. This
setting maintains all data after the point at which recording is stopped.
You can set the Punch Out measure by pressing the [6 ▲▼] buttons.
PEDAL PUNCH When this is set to ON, you can use Foot Pedal 2 to control the Punch In and
IN/OUT Punch Out points. While a Song is playing back, pressing (and holding) Foot
Pedal 2 instantly enables Punch In recording, while releasing the pedal stops
recording (Punch Out). You can press and release Foot Pedal 2 as often as you
want during playback to punch in/out of overwrite recording. Note that the
current function assignment of the Foot Pedal 2 is cancelled when the Pedal
Punch In/Out function is set to ON.
Pedal Punch In/Out operation may be reversed depending on the particular pedal you've
connected to the instrument. If necessary, change the pedal polarity to reverse the control
(page
Original data
1 2 3
Start overwrite
recording *1
1 2 3
Start overwrite
recording *1
1 2 3
Start overwrite
recording *1
1 2 3
Play back Play the keyboard to start
original data overwrite recording
1 2 3
Play back Play the keyboard to start
original data overwrite recording
1 2 3
Play back
Play the keyboard to start
original data
overwrite recording
1 2 3
Play back
Start overwrite recording
original data
1 2 3
Play back
Start overwrite recording
original data
1 2 3
Play back
original data Start overwrite recording
1 2 3
NOTE
109).
4 5 6 7
Stop recording *2
4 5
Deleted
Stop recording *2
4 5 6 7
Stop overwrite recording/
play original data
4 5 6 7
Stop recording *2
4 5 Deleted
Stop recording *2
4 5 6 7
Stop overwrite recording/
play original data
4 5 6 7
Stop recording *2
4 5
Deleted
Stop recording *2
4 5 6 7
Stop overwrite recording/
play original data
4 5 6 7
CAUTION
The recorded Song data will be
lost if you select another Song or
turn the power to the instrument
off without executing the Save
operation.
*1 To avoid overwriting measures 1–2,
8
start recording from measure 3.
*2 To stop recording, press the [REC]
button at the end of measure 5.
8
8
8
8
8
Previously recorded data
Newly recorded data
Deleted data
8