Yamaha Tyros3 Reference Manual page 58

Example of Step Recording—Melodies
In this example, keep in mind that one of the steps involves holding down a
key on the keyboard while executing the operation.
Select the Voice for recording after calling up the Step Recording display.
1
Press the [G] button to select "f."
2
Press the [H] button to select "Tenuto."
3
Press the [I] button to select the "dotted" note type.
3
3
4
Press the [6 ▲▼] button to select the quarter-note length.
5
Play the C3 key.
The first note is entered.
6
Press the [I] button to select the "normal" note type.
7
Press the [7 ▲▼] button to select the eight-note length.
8
Play the D3 key.
The second note is entered.
9
Press the [H] button to select "Staccato."
10
Press the [6 ▲▼] button to select the quarter-note length.
11
Play the keys E3 and F3 in order.
The first measure has been completed.
12
Press the [6 ▲▼] button again to enter a quarter-note rest.
To enter the rest, use the [4 ▲▼]–[8 ▲▼] buttons. (Press the button once to
select the rest value, and once again to actually enter it.) A rest having the
specified note length will be entered.
13
Press the [G] button to select "mp."
14
Press the [H] button to select "Normal."
15
While holding G3 key on the keyboard, press the [6 ▲▼] button.
Do not release the G3 key yet. Keep holding it while executing the following
steps.
16
While holding the G3 key, press the C4 key.
Do not release the G3 and C4 keys yet. Keep holding the notes while execut-
ing the following step.
17
While holding the keys G3 and C4, press the [5 ▲▼] button.
NEXT PAGE
58 • Tyros3 Reference Manual
1–5 6–8 9–11 12 13–17
* The numbers shown in the illustration
correspond to the following operation
step numbers.