Talk Settings - Yamaha Tyros3 Reference Manual

Talk Settings

This function gives you special settings for making announcements between songs, separate from the settings for
your singing performance.
1
Call up the operation display.
[MIC SETTING] → TAB [
2
Use the [A]/[B] buttons to select the parameter to be adjusted, then
set the value by using the [1 ▲▼]–[8 ▲▼] buttons or sliders.
● 1 Talk Setting Parameters
[1 ▲▼]
VOLUME
[2 ▲▼]
PAN
[4 ▲▼]
REVERB DEPTH
[5 ▲▼]
CHORUS DEPTH
[6 ▲▼]/
TOTAL VOLUME
[7 ▲▼]
ATTENUATOR
● 2 DSP Parameters
[3 ▲▼]
DSP MIC ON/OFF
[4 ▲▼]/
DSP MIC TYPE
[5 ▲▼]
[6 ▲▼]
DSP MIC DEPTH
Q Q Q Q ][ W W W W ] TALK SETTING
This determines the output volume of the microphone sound.
This sets the stereo pan position of the microphone sound.
These set the depth of the reverb effects applied to the microphone sound.
This sets the depth of the chorus effects applied to the microphone sound.
This determines the amount of attenuation to be applied to the overall sound
(excepting the microphone input)—allowing you to effectively adjust the bal-
ance between your voice and the overall instrument sound.
This turns the DSP effect applied to the microphone sound ON or OFF.
This selects the type of DSP effect to be applied to the microphone sound.
This sets the depth of the DSP effect applied to the microphone sound.
CAUTION
Settings in the TALK SETTING
Page are automatically saved to
the instrument when you exit from
the display. However, if you turn
the power off without exiting from
this display, the settings will be
lost.
NOTE
The settings here can be saved to USER,
HD or USB as a System Setup file:
[FUNCTION] → [I] UTILITY → TAB
[ Q Q Q Q ][ W W W W ] SYSTEM RESET. See
Tyros3 Reference Manual • 105
page 126.
10
10