Midi Receive Settings - Yamaha TYROS Owner's Manual

I MIDI messages which can be transmitted or received (recognized)
The following MIDI messages can be set on the TRANSMIT/RECEIVE display.
G NOTE..................................................................................................page 105
G CC (Control Change) ........................................................................page 105
G PC (Program Change) ......................................................................page 105
G PB (Pitch Bend) ................................................................................page 105
G AT (Aftertouch) .................................................................................page 105

MIDI Receive Settings

The explanations here apply when you call up the RECEIVE page in step #5 of the Basic Procedure on page 145. This determines
which parts will receive MIDI data and over which MIDI channels the data will be received.
Select a channel. The TYROS can
receive MIDI messages over 32 chan-
nels (16 channels x 2 ports).
I MIDI transmission/reception via the USB terminal and MIDI terminals
The relationship between the MIDI terminals and the USB terminal which can be used for transmitting/
receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
G MIDI reception
MIDI A IN
terminal
Merge
MIDI A01 - 16
Determines the part to which the received MIDI messages of
the selected channel are assigned. With the exception of the
two parts below, see page 134 for details about the parts.
• KEYBOARD
The received note messages control the TYROS' key-
board performance.
• EXTRA PART1 - 4
There are four parts specially reserved for receiving and
playing MIDI data. Normally, these parts are not used by
the instrument itself. The TYROS can be used as a 32-
channel multi-timbral tone generator by using these four
parts in addition to the parts (except for the microphone
sound) described on page 134.
USB MIDI B IN
connector terminal
Port handling
USB1 USB2
Merge
MIDI B01 - 16
The dots corresponding to each
channel (1 - 16) flash briefly when-
ever any data is received on the
channel(s).
Turns reception of the specified data type of the
selected channel on or off.
G MIDI transmission
MIDI A OUT
terminal connector
MIDI A01 - 16
Reference
MIDI
.................
............
USB MIDI B OUT
terminal
MIDI B01 - 16
TYROS Owner's Manual
147