Displaying Status - Cabletron Systems Fast Network 10 User Manual

• Address display
• Ipaddr
• Ident
These LCM commands are described in the sections that follow.

4.3.1 Displaying Status

The command displays the status of the FN10 and automatically
status
pages through the status of all of the Ethernet ports, pausing at each
screen of information.
You can also use the
NOTE
individual Ethernet ports by typing
number.
At the LCM prompt:
1. Type
status
LCM displays the following type of information.
Fast Network 10 User Guide
Using LCM to Check FN10 Status
command to display status for
status
status
and specifying a port
Page 4-9