Using Lcm To Check Fn10 Status - Cabletron Systems Fast Network 10 User Manual

Chapter 4: Monitoring and Managing Your FN10
• The number of SNMP PDUs received by the FN10 which had an
ASN.1 parsing error while being decoded by the FN10.
[
snmpInASNParseErrs
• The total number of MIB objects which have been successfully
retrieved by the FN10 as a result of SNMP GetRequest or GetNext
PDUs. [
snmpInTotalReqVars
• The total number of MIB objects which have been successfully altered
by the FN10 as a result of SNMP SetRequest PDUs.
[
snmpInTotalSetVars
• The total number of SNMP GetRequest PDUs received by the FN10,
which have been processed with no errors. [
• The total number of SNMP GetNext PDUs received by the FN10,
which have been processed with no errors. [
• The total number of SNMP SetRequest PDUs received by the FN10,
which have been processed with no errors. [
• The total number of SNMP PDUs created by the FN10, with a value
of in the PDU's
tooBig
• The total number of SNMP PDUs created by the FN10, with a value
of
noSuchName
• The total number of SNMP PDUs created by the FN10, with a value
of
badValue
• The total number of SNMP PDUs created by the FN10, with a value
of in the PDU's
genErr
• The total number of SNMP GetResponse PDUs created by the FN10.
[
snmpOutGetResponses
• The total number of SNMP Trap PDUs created by the FN10.
[
snmpOutTraps

4.3 USING LCM TO CHECK FN10 STATUS

The LCM commands that enable you to quickly check on the status of the
FN10 include:
• Status
Page 4-8
]
]
ErrorStatus
in the PDU's
in the PDU's
ErrorStatus
ErrorStatus
]
]
]
. [
snmpOutTooBigs
. [
ErrorStatus snmpOutNoSuchNames
. [
snmpOutBadValues
. [
snmpOutGenErrs
Fast Network 10 User Guide
snmpInGetRequests
snmpInGetNexts
snmpInSetRequests
]
]
]
]
]
]
]