Ethernet Networks - Cabletron Systems Fast Network 10 User Manual

LCM would display:
Address
02:04:06:03:2a:43
02:04:06:00:2a:67
02:04:06:a3:70:2b
Enter <CR> to continue, Ctrl-C to exit:
LCM allows you to display MAC addresses in two formats:
• Little-endian (default)
Little-endian is a method of storing or transmitting data in which the
least significant bit of each byte is presented first. This is used in

Ethernet networks.

• Big-endian
Big-endian is a method of storing or transmitting data in which the
most significant bit of each byte is presented first. Use the
to display MAC addresses in big-endian format.
Big-endian format separates the bytes with spaces rather than colons.
You can also enter MAC addresses in big-endian format by using
spaces rather than colons. This option is helpful if your network
includes Token Ring or FDDI along with Ethernet.
The command displays the IP addresses, subnet masks, and MAC
ipaddr
addresses of all FN10 ports. At the LCM prompt:
1. Type
ipaddr
LCM displays the current IP address table, for example.
Port IP Address
1 192.138.217.1
0.0.0.0
2
3 192.138.217.10
4 0.0.0.0
5 0.0.0.0
6 192.138.217.20
7 192.138.217.50
8 192.138.217.30
Fast Network 10 User Guide
Type Port
Learned 5
Learned 4
Learned 6
Address Mask
255.255.255.0
255.0.0.0
255.255.255.0
255.0.0.0
255.0.0.0
255.255.255.0
255.255.255.0
255.255.255.0
Using LCM to Check FN10 Status
Frames-From
Age(secs)
21
1
0
Frames-To
1181
3421
15339
option
big
MAC Address
00:40:27:00:06:1f
00:40:27:00:06:c3
00:40:27:00:06:3e
00:40:27:00:03:7a
00:40:27:00:05:c7
00:40:27:00:04:4a
00:40:27:00:06:9e
00:40:27:00:04:b4
Page 4-13
73
0
235