HP Integrity Superdome 2 User Manual page 109

The check box in the first column on the top row toggles all check boxes on or off for all enclosure
interconnect devices. This feature is useful if you want to toggle the UID state for all interconnect
devices at the same time. Otherwise, the first column contains check boxes that can be used to
select individual interconnects. After the appropriate interconnects are selected, the Virtual Power
or UID state drop-down can be selected to perform the appropriate action.
Item Description
Check box Click the check boxes next to the bay or bays where you want to apply the Virtual Power and
UID State features.
Bay Bay in the enclosure of the corresponding interconnect device. This box displays only populated
bays. Empty bays are not displayed in this table.
Status Overall status of the interconnect device. Possible values are Unknown, OK, Degraded, and
Failed.
UID Status of the UID on the interconnect device. Possible values are On (blue) or Off (gray).
Power State Power state of the interconnect device. Possible values are On or Off.
Module Type Network interface type for the interconnect device installed in this bay. Possible values are
Ethernet or fiber.
Management URL Address where the interconnect device can be managed and configured for use in the network.
Product Name Common descriptive name for the interconnect device.
Information on this page is current as of last download. Click the Refresh button to view updated
information.
The Virtual Power menu enables you to turn an interconnect device on or off. HP recommends that
only one device be turned on or off at a time using this feature.
The UID State menu is used to set the UID LED on the interconnect device. Turning on the UID LED
assists in locating a specific interconnect device within an enclosure. These LEDs can be turned on
or off one at a time or as groups depending on the checkboxes.
Interconnect bays 109