Power Supply status
Item
Bay
Model
Status
Input Status
Present Output (Watts)
Output Capacity (Watts)
Click the Refresh button to update the power subsystem information.
IOX Power Supply screen
Selecting a specific power supply opens the Power Supply Information-Bay x page, where x is the
bay of the selected power supply. This screen provides status information of the selected power
supply.
Status information
Item
Status
Input Status
Output Capacity
Model
Serial Number
Spare Part Number
IOX Thermal Subsystem screen
Onboard Administrator monitors up to 4 fans in the enclosure and adjusts fan speeds as necessary,
based on thermal and power measurements. The performance of each fan is monitored, and
Onboard Administrator reports any failures or warnings to the system log and HP SIM (when SNMP
is enabled).
Description
The bay in the IOX enclosure of the corresponding power supply. This box displays only
populated bays. Empty bays do not appear in this table.
The power supply model name.
The overall status of the power supply. Possible values are Unknown, OK, Degraded,
and Critical Error.
The input status of the power supply. Possible values are Unknown, OK, Degraded, and
Critical Error.
This value is a measure of the present output of the power supply in watts.
The amount of power provided by the power supply displayed in watts. This is a measure
of the output in dc watts generated by the power supply.
Description
The overall status of the power supply. Possible values are Unknown, OK, Degraded,
and Critical Error.
The input status of the power supply. Possible values are Unknown, OK, Degraded, and
Critical Error.
The maximum amount of power that can be provided by the power supply displayed in
watts.
The power supply model name.
The unique serial number of the power supply.
The spare part number to be used when ordering an additional or replacement power
supply.
IOX Thermal Subsystem screen 155