Enclosure Selection Screen; Configuration Management Screen - HP Integrity Superdome 2 User Manual

NOTE: After changing the settings, the browser cache must be cleared and the application must
be refreshed using the browser refresh button.
If you are using Microsoft Internet Explorer as your browser and Japanese as the display language,
all characters might not display properly. To fix this issue:
1. Go to the Regional and Language Options screen in your OS.
2. Select the Language tab.
3. Select Install files for East Asian Languages, and then click Apply.

Enclosure Selection screen

The Enclosure Selection screen displays all discovered enclosures and selects the active enclosure,
the enclosure you are signed in to by default. The check box beside each enclosure enables you
to select or clear that enclosure. Selecting the check box beside All Enclosures toggles the check
box for all enclosures.
Click the Refresh Topology button to update the rack topology information. When you select Refresh
Topology, the Enclosure Selection screen switches to the Linked Mode and all linked enclosures
appear.
If more than one enclosure is listed on the Enclosure Selection screen, select the enclosure you want
to set up, and click the Next button.
For possible values and descriptions of each box. see

Configuration Management screen

The Configuration Management screen enables you to set up the selected enclosures using a
configuration file saved from a previous setup. You can run scripts for multiple Onboard
Administrators before leaving the current screen.
42 First Time Setup Wizard
"Enclosure Settings screen" (page 71).