Enclosure Power Meter Screen - HP Integrity Superdome 2 User Manual

Item
Subsystem Status
Power Allocated
Power Available
Power Capacity
The Power Allocation screen displays basic information regarding the total capacity of the power
subsystem, redundant capacity, and the allocated power in watts. The Enclosure Internal Power
graph displays the watts that are allocated in green against a gray background, which represents
the total redundant capacity of the power supplies.
If you change the enclosure redundancy mode after power is allocated to the devices, then the
power subsystem might become degraded. Power is still allocated to the devices, but redundancy
might not function properly. If zero watts are available and the power graph displays degraded,
check your power subsystem and redundancy configurations. You can resolve the degraded
condition by changing your redundancy mode or by adding more power supplies to the enclosure.
Power Capacity will equal Power Allocated in the case where redundancy is lost.
To refresh this display, click the Refresh button beneath the table on the right side of the page.

Enclosure Power Meter screen

The Enclosure Power Meter screen displays peak power use, average power use, and allocated
power available in a graph, which enables fast and easy interpretation of the power situation for
the enclosure. The power meter is useful for showing trends in power consumption and can assist
in troubleshooting the power subsystem.
Description
The overall power status of the enclosure. Possible values are unknown, OK, Degraded,
and Failed.
The amount of power consumed by the devices in the enclosure in watts.
The amount of power available for all devices in the enclosure measured in watts.
The amount of power available for measured in watts.
Enclosure power management 123