Display Settings Menu - HP Integrity Superdome 2 User Manual

Display Settings menu

The Display Settings menu has the following options:
Door Display Setup— Runs the initial setup of the Door Display.
Disable Display— If this option is selected, the Door Display erases all settings. The Door
Display screen then immediately displays a screen saver. The screen saver displays for one
hour and then the Door Display shuts off.
IMPORTANT:
names and passwords before you can use the Door Display.
Calibrate Screen— If this option is selected, the Door Display enters calibration mode for the
touch screen.
IMPORTANT:
Using a finger is not precise enough to properly calibrate the screen.
Do not use metal objects to calibrate the screen. Using a metal object might damage the LCD
touch screen.
Firmware Update— Use this option to update the Door Display firmware. The current status
of the Door Display firmware is displayed on the menu button. The firmware status is one of
the following:
Setup required first— The initial Door Display setup has not been completed and the Door
◦
Display is unable to access firmware status.
Up-to-date— The current Door Display firmware matches the current revision available
◦
on the OA. No firmware update is required. If necessary, the Door Display firmware can
be reloaded using the Firmware Update menu.
◦ Update Available— A newer firmware revision is available for the Door Display.
◦ No Update Available— The OA does not have firmware available for the Door Display.
This occurs if the OA web server is disabled.
38 HP Superdome 2 Door Status Display
If you select this option, you must re-enter all setting information, such as user
HP recommends using a stylus or the back of a pencil to calibrate the screen.