Configuring Hp Integrity Superdome 2 Compute Enclosures And Enclosure Devices; Viewing The Status Screens - HP Integrity Superdome 2 User Manual

7 Configuring HP Integrity Superdome 2 compute enclosures
and enclosure devices

Viewing the status screens

Each compute enclosure in the complex can be selected from the left navigation tree. Clicking the
enclosure name opens the main status screen of the enclosure.
On this page, three tabs are available at the top of the main page:
Status
Information
Virtual Buttons
The Status tab displays one of the following values as Overall Enclosure Status:
Critical/Failed
Major
Minor/Degraded
Warning
Normal/OK
Disabled
Unknown
Informational
The Active HP Superdome 2 Onboard Administrator Status and Standby HP Superdome 2 Onboard
Administrator Status are similar to the Overall Enclosure Status and display a status for the Onboard
Administrator. If a Standby Onboard Administrator is not present in the system, its status value is
Absent.
Enclosure Power Mode displays the current power mode of the enclosure. The following values
are possible:
AC Redundant
Power Supply Redundant
Not Redundant
The Enclosure Device Status Overview is divided into four sections:
Device Bay Overview
Power Supply Overview
Interconnect Bay Overview
Fan Overview
For each of these sections, the following values are possible:
Critical/Failed
Major
Minor/Degraded
Warning
Normal/OK
Disabled
70

Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices