Virtual Power - HP Integrity Superdome 2 User Manual

Item
Information on this page is current as of the last download. To view updated information, click the
Refresh button.
UID State
The UID State drop-down is used to set the UID light on the blades. Turning on the UID light aids
in locating a specific blade within an enclosure. The UID lights can be turned on or off one at a
time or as groups, depending on the checkboxes.

Virtual Power

NOTE: This menu is not available for HP Integrity Superdome 2 server blades or storage blades.
Button
Momentary Press
Press and Hold
Cold Boot
Reset
One Time Boot
NOTE: This menu is not available for HP Integrity Superdome 2 server blades or storage blades.
Option
Diskette Drive (A:)
CD-ROM
Hard Drive C:
RBSU
PXE NIC
DVD
NOTE: This menu is not present for HP Integrity Superdome 2 server blades or storage blades.
For connecting the selected blades to the enclosure media, the DVD menu enables you to select
one of the following:
Enclosure DVD, if present
One of the listed ISO files from an attached USB key
None
102 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices
Description
NOTE: Not applicable for HP Integrity Superdome 2 server blades or storage blades.
Description
This button mimics a physical momentary press of the power button on the server blade. Clicking
this button powers the server blade on or off gracefully.
This button mimics a physical press and hold of the power button on the server blade. Clicking
this button forces the server blade to shut power off without regard for first shutting down the OS
before turning power off. This option is not available when the server blade is off.
Clicking this button immediately removes power from the system. This option is not available
when the server blade is off.
Clicking this button performs a system reset. This option is not available when the server blade
is off.
Description
Forces the server blade to reboot to the diskette drive. Be sure the diskette drive is attached to
the server blade before selecting this option.
Forces the server blade to reboot to the CD drive. Be sure the CD drive is attached to the server
blade before selecting this option.
Forces the server blade to reboot to the hard disk.
Forces the server blade to boot to the ROM-Based Setup Utility.
Forces the server blade to boot to PXE NIC.