Interconnect Bay Virtual Buttons Tab - HP Integrity Superdome 2 User Manual

Hardware Information
Item
Product Name
Management IP Address
Management URL
User Assigned Name
Part Number
Spare Part Number
Serial Number
Type
Manufacturer
Temperature Sensor
Firmware Version
Connectivity information
Item
JS2 Connector
Internal Ethernet Interface to
OA
Internal Ethernet Route to OA
Internal Serial Interface to OA
Internal Serial Route to OA
Serial Port Baud Rate
External Serial Port Interface
External Ethernet Interface

Interconnect Bay Virtual Buttons tab

Interconnect bay virtual buttons enable you to cycle power, reset, or toggle the UID on the device
of your choice from the Onboard Administrator GUI.
1 12 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices
Description
The common descriptive name of the interconnect device.
IP address of the interconnect management interface.
Web address of the interconnect management interface.
A name assigned to the interconnect by the user. If supported, the name is assigned using
the interconnect Management Interface.
The part number to be used when ordering an additional interconnect device of this type.
The part number to be used when ordering a replacement interconnect device of this type.
The unique serial number of the interconnect device.
The interface type of the interconnect device. Possible values are Ethernet or fiber.
The name of the company that manufactured the interconnect device.
Indicates whether or not the interconnect device has a temperature sensor.
The firmware version of the interconnect module.
Description
This box displays the presence or absence of the JS2 connector.
This box displays the presence or absence of an internal Ethernet interface to the
Onboard Administrator.
This box displays the status of an internal Ethernet route to the Onboard Administrator.
Possible values are Enabled or Disabled.
This box displays the presence or absence of an internal serial interface to the Onboard
Administrator.
This box displays the status of an internal serial route to the Onboard Administrator.
Possible values are Enabled or Disabled.
This box displays the serial port baud rate. This only displays if an external serial port
interface is present.
This box displays the presence or absence of an external serial port interface.
This box displays the presence or absence of an external Ethernet interface.