Download Emuls; Demo Mode; Factory Defaults; Energy Conserve - Lexmark E238 Service Manual

Download Emuls

This menu item only displays if a downloaded emulator is installed.
To disable downloaded emulations:
1. Select Download Emuls from CONFIG MENU.
2. Select Disable.
The printer performs a POR and starts as if the downloaded
emulations were not loaded.
To reactivate downloaded emulations, restart the printer.

Demo Mode

This menu item lets you turn demo mode on or off.
1. Select Demo Mode from CONFIG MENU.
2. Select Activate to turn the demo mode on or Deactivate to turn demo
mode off.

Factory Defaults

This menu lets you restore the printer settings to their factory default values.
1. Select Factory Defaults from the Configuration Menu.
2. Select either Restore Base or Restore Network. Restore Network is
only available if an integrated network adapter is installed.

Energy Conserve

Select On to allow access to the Power Saver menu. If you select Off, an
additional item appears in the Power Saver menu. Disable lets you enable
or disable Power Saver from the customer menu.
Diagnostic aids—E340 and E342n
4511-xxx
3-17