Transport Motor Cable Removal - Lexmark E238 Service Manual

Transport motor cable removal

3. Unplug the transport motor cable at J8 on the controller card.
4. Remove the LVPS/HVPS card assembly. See
assembly removal" on page 4-41
5. Extract the cable (A) through the side frame, leaving it free at the
opening above the LVPS/HVPS (B).
6. Turn the printer over.
7. Remove the fuser. See
8. Extract the cable through the hole and from its retainers behind the
fuser.
9. Unplug the cable at the motor. 30
1. Remove the right cover. See
removal" on page 4-12
2. Remove the controller card cover. See
card removal" on page 4-15
A
"Fuser removal" on page
"Right side cover
for more information.
for more information.
"LVPS/HVPS card
for more information.
B
4-28.
Repair information
4511-xxx
"Controller
4-51