Lexmark E238 Service Manual page 95

User attendance messages (continued)
Message
58 Too Many
Flash Options
84 Photoconductor
Life Warning
84 Replace
Photoconductor
88 Toner Low
Explanation
This error displays when too many flash
options are installed in the printer.
The following options may be taken:
• Turn off the printer, and remove the extra
flash options.
• Press Go to clear the message. The extra
flash options are ignored.
This message displays when the
photoconductor unit is near end of life. Press
Go to clear the message.
This message displays when the
photoconductor is exhausted. The printer is
disabled until the photoconductor is replaced.
Replace the photoconductor:
1. Turn the printer off, and replace the
photoconductor unit.
2. Reset the page count.
• Press and hold Select and Return while
turning the printer on.
• Release the button when Performing
Self Test displays.
• Select Reset Maint Cnt, and press
Select.
The counter is reset to zero.
This message displays when toner low occurs
and the toner low alarm is activated. Press Go
to clear this message.
Diagnostics—E340 and E342n
4511-xxx
2-63