Lvps/Hvps Card Assembly Removal - Lexmark E238 Service Manual

LVPS/HVPS card assembly removal

3. Place the printer onto its top, with the back and bottom in view.
4. Remove two screws (A), one left of the power switch and the other at
the opposite side of the panel.
5. Remove the screws (B) securing the two foot brackets.
1. Remove the cover extender (if installed).
2. Remove the rear cover. See
on page 4-10
A
B
for more information.
A
4511-xxx
"Rear cover removal"
B
Repair information
4-41