Lexmark E238 Service Manual page 106

4511-xxx
Sub error codes (continued)
First 6 bytes sub
error code data
(xx can be any
value)
84 xx 2C x1
x2 x3
84 xx 2D x1
x2 x3
84 xx 2E x1
x2 00
84 xx 2F x1
x2 x3
2-74
Service Manual
Explanation
Unrecoverable no gap jam. Engine
detected no gap at the manual feeder
sensor, attempted to open the gap by
stopping the feed rolls, but no trailing
edge was ever seen at the input sensor.
(x1=media size, x2=media source,
x3=LastdetectedSize)
Misidentified no gap jam. Engine detected
no gap at the manual feeder sensor,
attempted to open the gap by stopping
the feed rolls, trailing edge was seen at
the input sensor, manual feeder sensor is
no longer covered.
(x1=media size, x2=source,
x3=LastDectedSize)
Failed no gap jam recovery. Engine
detected no gap at the manual feeder
sensor, opened the gap by stopping the
feed rolls, but never saw the leading edge
of the second page at the input sensor.
(x1=RecoveryStatus, x2-source)
Laser servo never started due to potential
conflict with the transfer servo.
(x1=bit 0: transfer servo started,
bit 1: transport started; x2+x3=transfer
servo count value.)
Possible causes are:
• Slow or missing transport motor
positional feedback.
• Media arrives too early at the input
sensor.
Possible
error
message
200