Serial Number; Model Name; Edge To Edge - Lexmark E238 Service Manual

4511-xxx

Serial Number

The serial number can only be viewed and cannot be changed.
To view the serial number:
1. Select Serial number from PRINTER SETUP.
2. Press Return to return to PRINTER SETUP.
Engine Setting 1 through 4
Warning: Do not change these settings unless requested to do so by your
next level of support.

Model Name

The serial number can only be viewed and cannot be changed.
Configuration ID
The configuration ID is used to communicate characteristics of certain areas
of the printer that cannot be determined by hardware sensors. The
configuration ID was originally set when the printer was manufactured and is
located on the printer label.

Edge to Edge

When Edge to Edge is set to On, text and graphics are printed with all
margins set to the physical edges of the page. This feature does not work in
PPDS emulation.
Parallel strobe adjustment (Par S Strobe Adj)
This setting adjusts the factory setting for the amount of time the strobe is
sampled to determine that valid data is available on the parallel port.
Incrementing this value by one means the strobe is sampled
50 nanoseconds longer. The range of values are between -4 and +6, in
increments of one. A value of zero indicates no change is made from the
factory setting.
3-30
Service Manual